Table of Contents
Advertisement
Port 2 : Video or S-Video
What can be done ?
Port 2 can be used as a Video or S-Video input.
How to configure port 2 ?
To change the Port 2 setting, handle as follow :
1. Push the cursor key é or ê to select Port 2 (menu 1).
2. Press ENTER to toggle between Video and S-Video.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING
CLAMP TUNING : normal
PORT2 :
VIDEO
LINE DOUBLER : ON
Select with é or ê
<ENTER> to accept
<EXIT> to return.
menu 1
Line Doubler/Line Multiplier
What can be done ?
This menu item is only available when the projector is equipped with a line doubler or line multiplier.
Line doubling or multiplying is only possible for Video, S-Video, Component Video images on standard line frequency and RGB signals
on 15 kHz.
To eliminate the video line patterns and to improve the image stability, the line doubler/multiplier has to be switched on. The line doubler/
multiplier is default set in the ON position when starting up for the first time. The setting of the line doubler/multiplier will be saved
together with the source number. Each time this source number is selected, the last saved version will be loaded.
How to select when a line doubler is built in ?
To toggle the line doubler setting :
1. Push the cursor key é or ê to select Line Doubler (menu 1).
2. Press ENTER to toggle between ON and OFF.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : EBU
LINE DOUBLER :
ON
Select with é or ê
<ENTER> to accept
<EXIT> to return.
menu 1
5976064 BARCOCINE 8 09022000
Random Access Adjustment Mode
7-7
Advertisement
Table of Contents
