Table of Contents
Advertisement
Random Access Adjustment Mode
Line Doubler (option)
Line doubling is only possible for Video, S-Video, Component
Video images on standard line frequency and RGB signals on 15
kHz.
To eliminate the video line patterns and to improve the image
stability, the line doubler has to be switched on. The line doubler
is default set in the ON position when starting up for the first time.
The setting of the line doubler will be saved together with the
source number. Each time this source number is selected, the
last saved version will be loaded.
Highlight Line Doubler with the control disk and press ENTER to
toggle between ON (active) and OFF (non active).
EXIT will return to the random access selection menu.
Port 2 : S-Video/Video
Port 2 can be used as Video or S-Video input.
Highlight Port 2 by pushing the control disk up or down and press
ENTER to toggle between Video and S-Video .
Peaking
Peaking improves the contours in an projected image.
Highlight PEAKING by pushing the control disk up or down and press
ENTER to toggle the peaking between OFF and ON.
During the creation of new settings for a RGB source the peaking is
switched to OFF.
Color Select
Highlight COLOR SELECT by pushing the control disk up or down
and press ENTER to display the color select menu.
ENTER continues to the color select menu.
EXIT will return to Internal Crosshatch Selection or Setup
Pattern Selection Menu.
ADJUST returns to operational mode.
Use the control disk to highlight a color (CRT) or combination of
colors to display the projected image in that specific color.
To select a new color, press ENTER , the color selection menu
appears again on the screen. To terminate the color select proce-
dure, press EXIT .
ENTER continues with the selected color or color combina-
tion.
EXIT returns to the Random access main menu.
6-4
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
LINE DOUBLER : ON
Select with
or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
LINE DOUBLER : ON
PORT 2 : S-VIDEO
Select with
or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING :
OFF
LINE DOUBLER : ON
Select with
or
<ENTER> to accept
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with
or
<ENTER> to accept
COLOR SELECT
<EXIT> to return.
RED
GREEN
BLUE
RED AND GREEN
BLUE AND GREEN
RED AND BLUE
Select with
or
<ENTER> to accept
<EXIT> to return.
5975977A BARCODATA 708 260597
Advertisement
Table of Contents
