Table of Contents
Advertisement
Picture tuning
Depending on the source type (video, S-Video, RGB(S) analog with composite
or Tri-level sync, component input with composite or Tri-level sync) the picture
tuning menu offers the possibility to toggle :
For Video, S-Video or Component video sources :
- The Synchronisation speed
- The Line Doubler feature (option)
For RGB analog or component input with composite or tri-level sync sources:
- Synchronisation speed
- Enhanced blue on or off
Sync Fast/Slow toggle
Highlight Sync by pushing the
control disk up or down and
press ENTER to toggle be-
tween FAST and SLOW
Note : SYNC is normally used
in the SLOW position.
FAST position is used to com-
pensate
pulses from older video play-
back equipment.
Hint : when the line doubler
feature is ON (active), toggle
the sync to FAST.
Line Doubler (option)
Line doubling is only possible for Video, S-Video or Component Video images
on standard line frequency.
To eliminate the video line patterns and to improve the image stability the line
doubler has to be switched on. The line doubler is default set in the ON position
when starting up for the first time. The setting of the line doubler will be saved
together with the source number.
Hint : when the line doubler feature is ON (active), toggle the sync to FAST.
When a bad video tape has to be displayed, switch off the line doubler feature to
obtain a stable image.
7-6
The
for unsteady sync
GUIDED ADJUSTMENT MODE
P IC TURE TUN ING
S Y N C : FA S T
C H R O M A D E L A Y : P A L
C O N T I N U E
Sel ect with
< E N TE R > t o ac c ept
< E X IT> t o ret urn
ENTER toggles between SLOW and FAST.
EXIT returns to the Guided Adjustment menu.
R5975238 BARCOVISION 701 MULTIMEDIA 070497
or
Advertisement
Table of Contents
