Selecting Setup Pattern; Set Up Of The Selected Setup Pattern; Note - Barco Cine 8 Owner's Manual

Random Access Adjustment Mode
RANDOM ACCESS
ADJUSTMENT MODE
SETUP PATTERN SELECTION

Selecting Setup Pattern

Set up of the Selected Setup Pattern ?

If an external source is connected to the projector, menu 1 will be displayed.
To select the desired setup pattern, handle as follow :
Push the cursor keys é or ê to highlight the desired setup pattern
1
2 Press ENTER to select.
Choose a setup pattern
from below :
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Source 01
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Genlocked pattern : internally generated cross hatch pattern, locked on the external source.
Internal # pattern : internally generated cross hatch pattern and locked on internal generated sync signals. (No external source
necessary)
If no external source is connected to the projector, the internal cross hatch pattern menu will be displayed.

Note:

The menus in this manual are created for an external source, connected to one of the inputs, and the 'Genlocked Pattern' is selected.
7-2
previous page
COLOR SELECT
CONVERGENCE
FOCUSING
ORBITING
CONTRAST MODULATION
SOFT EDGE CORRECTION
RED
GREEN
BLUE
RED AND GREEN
BLUE AND GREEN
RED AND BLUE
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
RED
GREEN
BLUE
5976227 BARCOCINE 8 13042001