Selecting Setup Pattern - Barco BarcoVision R9000740701 Owner's Manual

Selecting Setup Pattern

If an external source is con-
nected to the projector, the
Setup pattern menu will be dis-
played. Push the control disk
up or down to highlight the
desired setup pattern and then
press ENTER.
Genlocked pattern : internally
generated cross hatch pattern,
locked on the external source.
Internal # pattern : internally
generated cross hatch pattern
and locked on internal gener-
ated sync signals. (No external
source necessary)
If no external source is con-
nected to the projector, the in-
ternal cross hatch pattern menu
will be displayed.
The menus in this manual are
created for an external source,
connected to one of the inputs,
and the 'Genlocked pattern' is
selected.
7-4
GUIDED ADJUSTMENT MODE
C h o o s e
a s et up pat t ern
f ro m bel ow :
S E L E C T E D S O U R C E
G E N L O C K E D P A T T E R N
I N T E R N A L # P A T T E R N
Selec t w ith
t h en < E N TE R >
< E X I T> t o ret urn
ENTER continues to Guided Adjustment
Mode or Internal # Pattern Selection
EXIT returns to Path Selection
ADJUST returns to operational mode
R5975238 BARCOVISION 701 MULTIMEDIA 070497
s o ur c e 1
or