Selecting Setup Pattern; Internal Cross Hatch Pattern - Barco R9002031 Owner's Manual

Hide thumbs Also See for R9002031:
Table of Contents

Advertisement

Selecting Setup Pattern

If an external source is connected to the projector, this menu will be displayed. Push the
control stick forward or backward to highlight the desired setup pattern and then press
ENTER .
Genlocked pattern : internally generated cross hatch pattern, locked on the external source.
Internal # pattern : internally generated cross hatch pattern and locked on internal generated
sync signals. (No external source necessary)
ENTER continues to Random Access Adjustment Mode or Internal # Pattern
Selection
EXIT returns to Path Selection menu
ADJUST returns to Operational mode
If no external source is connected to the projector, the internal cross hatch pattern menu will
be displayed.
Note: The menus in this manual are created for an external source, connected to one of the
inputs, and the 'Genlocked Pattern' is selected.

Internal Cross Hatch Pattern

The Internal # pattern menu will be displayed if the internal cross hatch pattern has been
selected or if no source is connected to the projector.
The table below lists the 8 fixed factory preset frequencies available. Another 8 blocks are
custom programmable.
Push the control stick forward or backward to highlight the desired cross hatch frequency.
Use the left and right arrow to scroll to another page. Press ENTER . if the desired block is
selected.
kHz/Hz
15.6/50
PAL/SECAM
15.7/60
NTSC
31.2/50
EDTV
31.5/60
IDTV
31.2/50
HDTV EUREKA
31.5/60
HDTV ATV
33.7/60
HDTV HIVISION
15.8/60
EGA 1
21.8/60
EGA 2
61.0/76
VGA 1,2
35.5/87
VGA 4
48.5/60
SUPER VGA 1
44.2/70
SUPER VGA 2
61.0/76
SUPER VGA 3
63.9/76
APPOLLO
22.2/60
MAC CLASSIC
ENTER continues to the Random Access Adjustment Mode.
EXIT returns to the Setup Pattern Selection menu.
5975597 BARCODATA 808S 110397
Random Access Adjustment Mode
Choose a setup pattern
from below :
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Select with
or
then <ENTER>
<EXIT> to return.
INTERNAL # PATTERN
kHz / Hz
15.6/50
PAL/SECAM
15.7/60
NTSC
31.2/50
EDTV
31.5/60
IDTV
31.2/50
HDTV EUREKA
31.5/60
HDTV ATV
Select with
or
scroll with
or
<ENTER> to accept
<EXIT> to return
Source 01
6-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

R9002038

Table of Contents