Connecting A Rgb Analog Source To Port 4/5; Connecting A Rgb Analog Source With Tri-Level Sync To Port 4/5 - Barco R9002040 Instruction Manual

Source Connections

Connecting a RGB Analog source to port 4/5.

RGB analog input terminals with separate H and V sync inputs, with
composite sync input or with sync signals on green (automatic sync
detection).
Always use an interface when a computer and local monitor have to
be connected to the projector. See 'Connecting a RGB Analog
source to port 3' for a list of BARCO interfaces which can be applied.
RGB input selection :
(RGB : R, G, B signals with automatic sync detection)
with the RCU or the build in RCU : press digit
button 4 or 5
Connecting a RGB Analog source with Tri-level
sync to port 4/5.
(option)
RGB analog input terminals with Tri level sync input or
with Tri-level sync on green.
automatically where the sync signal is located.
RGB input selection :
(RG3sB : R, G, B signals with automatic Tri-level sync detection)
with the RCU or the build in RCU : press digit button 7
6 - 4
The projector detects
L
RS232 IN RS232 OUT IR REMOTE R
L
RS232 IN RS232 OUT IR REMOTE R
Audio
VCR HDTV player
R L
PORT 4/5
ANALOG INTERF. 120MHz
ON
INPUT
B H
V
OFF
G
R
INP INP
75 o h m t erm. in ver.
R L
PORT 4/5
to next projector or
to a monitor
5975537 RETROGRAPHICS 808s 060197