Connecting A Rgb Analog Source With Composite Sync - Barco R9002370 Owner's Manual

Connections
Video input selection
a. with the RCU : press digit 1
OR
b. with the local keypad
- press ADJUST key, the GENERAL ACCESS menu is displayed on the screen
- use the control keys to highlight 1
- press ENTER to select the highlighted source
Connecting a S-Video to port 2.
Separate Y-luma/C-chroma signals for higher quality playback of
Input selection
a. with the RCU : press digit 2
OR
b. with the local keypad :
- press ADJUST key, the GENERAL ACCESS menu is displayed on the screen
- use the control keys to highlight 2
- press ENTER to select the highlighted source.

Connecting a RGB Analog source with composite sync.

RGB analog input terminals with composite sync input or with sync on green or separate sync. The projector detects automatically
where the sync signal is located. It accepts RGB at 15 and 32 K.
Always use an interface when a computer and local monitor have to be connected to the projector. Examples of interfaces which
can be applied :
Universal analog interface: R9826100
3 - 2 ___________________________________________________________________________________ R5975809 BARCO CINE 6
Luma / Chroma
V C R
S - VHS
S-VHS signals.
Audio Amplifier
GENERAL ACCESS
5 6 BRIGHTNESS
CONTRAST
3 4
1 2
Enter ADJUST
or
Select with
then <ENTER>
<EXIT> to return
GENERAL ACCESS
BRIGHTNESS
5 6
CONTRAST
3 4
1 2
Enter ADJUST
or
Select with
then <ENTER>
<EXIT> to return