Connecting A Rgb Analog Source With Composite Sync To Port 4/5; Connecting A Rgb Analog Source With Tri-Level Sync - Barco Cine 8 Manual

Connections

Connecting a RGB Analog source with composite sync to port 4/5.

RGB analog input terminals with separate H and V sync inputs, composite sync input or with sync on green. The projector detects
automatically where the sync signal is located.
Note :
If a line doubler or line multiplier is built in, the default position of this line doubler (multiplier) soft option is ON (active). The video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter
'Random access' adjustment mode).
Always use an interface when a computer and local monitor have to be connected to the projector.
(see Connecting an Analog source to Port 3).
RGBS or RGsB input selection
With the RCU or built-in RCU : press digit button 4 or 5
'  Ã ƒr …v ƒ ur …hy †
POWER / MAINS COMM. PO RT

Connecting a RGB Analog source with Tri-level sync.

RGB analog input terminals with Tri level sync input or with Tri-level sync on green. The projector detects automatically where the
sync signal is located.
RGB3S or RG3sB input selection
With the RCU or built-in RCU : press digit button 7
'  Ã ƒr …v ƒ ur …hy †
POWER / MAINS COMM. PO RT
6-6
PO RT 4/5 PO RT 2
PORT 3
LQ Y HU
&$ Âu €Ã ‡ r…€ 
PO RT 4/5 PO RT 2
PORT 3
8‚€ƒ‚ †v‡rÃ
‰ vqr‚
PORT 1 PROJECTOR MODE
PORT 1 PROJECTOR MODE
6ˆqv‚ÃPˆ‡
5976066 BARCOCINE 8 10022000