Which Source To Which Input; Connecting A Composite Video Source - Barco R9002380 Owner's Manual

Connections

Which source to which input

R S23 2 IN R S23 2 OUT
Source No Projector input
1 Comp. Video
2 S-Video*
3 RGBS or RGsB**
3 RGB3S or RG3sB***
3 (R-Y)Y(B-Y)S or
(R-Y)Ys(B-Y)****
3 (R-Y)Y(B-Y)3S or
(R-Y)Y3s(B-Y)*****
* Input signal Y/C (luma/chroma)
** Input signal : R, G and B with composite sync on G or separate composite sync
*** Input signal : R, G and B with Tri level sync on G or separate Tri level sync.
**** Input signal : R-Y, Y and B-Y with composite sync on Y or separate composite sync
***** Input signal : R-Y, Y and B-Y with Tri level sync on Y or separate Tri level sync.

Connecting a Composite Video source.

Composite video signals from a VCR, OFF air signal decoder, etc..
Note :
If a line doubler or line multiplier is built in, the default position of this line doubler (multiplier) soft option is ON (active). The video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter
'Random access' adjustment mode).
RS232 IN RS232 OUT
TV tuner, e.g. MARCO POLO
VCR
2-2
C OMM POR T R G(S) B
S-VIDEO
R E MOT E
(8 0 0 p erip h erals) S VIDE O
R -Y Y ( S) B - Y
Press digit button
C OMM POR T
R G(S) B
S-VIDEO
(800 peripherals) REMOTE
S VIDEO
R-Y Y(S)
B-Y
Composite
video
Audio amplifier
1
2
3
4
5
6
5976066 BARCOCINE 7 011299