Deletion Of All Blocks; All Settings To Midpos; Undo All Settings To Midpos - Barco R9002372 Owner's Manual

Deletion of all blocks

Highlight DELETE ALL BLOCKS using the arrow keys and press ENTER.
A confirmation screen will be displayed. Press ENTER to delete all blocks, or press EXIT to return without deleting anything.
Note : Once ENTER is pressed, all block headers and settings are permanently removed and cannot be restored.
All settings to midposition
This item is password protected.
Highlight All settings to midposition using the arrow keys and press ENTER to set all settings to midposition.
A confirmation menu will be displayed first.
In this menu :
ENTER will set all settings to their midposition.
EXIT will cancel the operation.
Undo all settings to midposition
When 'All settings to midposition' is selected, this action can be cancelled by selecting 'Undo all settings to midposition' in the Memory
Management menu. Press ENTER after selecting this option.
An Undo is possible as long as the projector is on the same source (i.e. same adjustment block) even when some adjustments
like geometry or convergence are readjusted. When Undo is selected, all settings are restored to their previous settings.
R5976381.01 BARCO CINE6 31012002 __________________________________________________________________________
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MID POS
R & B CONVERGENCE TO MID
or
Select with
then <ENTER>
<EXIT> to return
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MID POS
R & B CONVERGENCE TO MID
or
Select with
then <ENTER>
<EXIT> to return
DELETE ALL BLOCKS
All 24 blocks
will be deleted !
<ENTER> to Confirm
<EXIT> to cancel
SET TO MIDPOSITION
All settings
in current blocks
will be overwritten !
<ENTER> to Confirm
<EXIT> to cancel
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
UNDO MIDPOSITION
R & B CONVERGENCE TO MID
or
Select with
then <ENTER>
<EXIT> to return
Service Mode
7-7