Scan
Loading scan data using a PC-based application
This feature can be used to load scan data from a TWAIN-compatible or WIA-compatible application
installed on a computer. You can set the document load conditions from the PC display to enable you
to load the document while checking the scan results on the Preview screen.
Notes
•
Install the scan driver to use this function. For information on how to install the scan
driver, refer to
•
The items you can set will vary according to the TWAIN-compatible and WIA-
compatible applications you are using.
•
The supported applications are 32-bit only.
Follow the steps below to perform the operation.
1.
Place the document.
Refer to
Placing the document
2.
Start an application to load the scanned data.
3.
From the File menu, select the item for the scanner (source).
4.
Select Xerox WorkCentre 5019/5021.
5.
Change other options if needed.
Note
For information on the scan functions, click Help in the screen to display the help
information.
6.
Click Scan.
6-6
Installing the scan driver
on page 6-1.
on page 2-3.
WorkCentre 5019/5021
User Guide