Updating Procedure - Toshiba e-STUDIO650 Service Handbook

6. 2. 3. Updating procedure

Update the firmware in the [3][9] mode as follows:
1. Turn ON the power of the copier while the digital keys [3] and [9] are pressed simultaneously.
2. The following is displayed on the control panel of the copier.
3. Make a serial connection using the dial-up networking function of the PC.
Refer to "6.1. Installing Software for Firmware Updating" for the dial-up network connection.
Double-click the defined icon for connection in the "Dial-up Networking" dialog box to perform the
connection processing.
e-STUDIO550/650/810 FIRMWARE UPDATING
Firmware Version Up Mode
> Make a connection from PC.
6 - 20
Enter "#39" in the "Phone number" box.
JUNE 2002 © TOSHIBA TEC