Toshiba e-STUDIO650 Service Handbook page 63

(6) Check if the value
sensor is 2.45 V to 2.55 V).
(7) If the value is not within the range of 235 to 245%, press the Up or Down icon to adjust the
value manually.
Note: The relation between the icons and the values
Icon to be pressed
(8) Press the [SET] icon or [INTERRUPT] key.
The drum, developer unit, etc. are stopped and the following is displayed.
[SET]
[INTERRUPT]
(9) Enter "290" using the digital keys and press the [START] key. (enforced performing of image quality
control)
The display changes as follows.
[290] [START]
(10)After the operation has finished, the copier are automatically stopped and the following is displayed.
(11)Turn OFF the power.
JUNE 2002 © TOSHIBA TEC
is within the range of 245 to 255 (the output voltage range of the auto-toner
Value
Up Increased
Down Decreased
100%
or TEST MODE
100%
TEST MODE
100%
TEST MODE
3 - 3
and is as follows.
Value
Increased
Decreased
A3
A
A3
290
WAIT
A3
A
e-STUDIO550/650/810 ADJUSTMENT