Preventive Maintenance Checklist - Toshiba e-STUDIO650 Service Handbook

Notes: 1. Perform cleaning and lubricating in every 400,000 copies for the e-STUDIO550, 460,000 copies for the
e-STUDIO650 and every 500,000k copies for the e-STUDIO810. Lubricate the replacement parts
following to the replacement cycle.
2. Values under "Replacement" indicate the replacement cycle for the e-STUDIO550/e-STUDIO650/e-
STUDIO810.
3. <P-I> under "Remarks" indicates page items of the parts list.
4. The replacement cycle of the parts in the feeding section equals to the number of sheets fed from each
paper source.
5. Be careful not to put oil on the rollers, belts and belt pulleys when lubricationg.
Section
Scanner 1. Original glass
2. ADF original glass
3. Mirror-1
4. Mirror-2
5. Mirror-3
6. Reflector
7. Lens
8. Exposure lamp
9. Automatic original detection sensor
10. Slide sheet (front and rear)
Laser unit 11. Slit glass
Feed unit 12. Pickup roller (cassette)
13. Feed roller (cassette)
14. Separation roller (cassette)
15. Pickup roller (Tandem LCF)
16. Feed roller (Tandem LCF)
17. Separation roller (Tandem LCF)
18. Transport roller
19. Paper guide (all)
20. Drive gear (tooth face and shaft)
21. GCB bushing bearing
22. Registration roller
23. Paper dust removal brush
e-STUDIO550/650/810 PREVENTIVE MAINTENANCE

[Preventive Maintenance Checklist]

Items to check
Lubri-
Cleaning
cation
or A
or A
or A
W
W
A
W
L
A
4 - 6
Replace-
-ment Operation Remarks
(x1,000 check <P-I>
200/200/200
<P7-I38>
200/200/200
<P7-I38>
200/200/200
<P7-I52>
300/300/300 <P7-I38>
300/300/300 <P7-I38>
300/300/300 <P7-I52>
<P16-I8>
<P16-I19>
JUNE 2002 © TOSHIBA TEC
*1
*2
*3
*3
*4
*5