Toshiba e-STUDIO650 Service Handbook page 281

4. The following is displayed if the serial connection was completed successfully.
Firmware Version Up Mode
Established serial connection with PC.
> Press START key to install new
firmwares.
> Please select a target with DIGITAL keys.
You can press [HELP] to confirm the current version (the version before the copier is updated).
*The engine firmware version cannot be displayed in this screen. Use the setting mode to confirm
them.
08-903 : Printer ROM version (LGC)
08-906 : PFC ROM version (LGC)
08-904 : Laser ROM version (PLG)
08-905 : Scanner ROM version (SLG)
Press [HELP] again to return to the above screen.
Firmware Version Up Mode
Established serial connection with PC.
Press START key to next.
Firmware Version Up Mode
Established serial connection with PC.
Press START key to previous.
JUNE 2002 © TOSHIBA TEC
target version code
1 005.101 U
2 004.001 0
3 005.002 0
4 006.001 6
5 006.001 7
6 006.003 11
target version code
7 006.001 8
8 006.001 10
9 006.002 13
10 006.001 3
6 - 21
Target: 1
Number of the target area for
updating
Target: 1
J or U is displayed.
[START] key
Target: 1
e-STUDIO550/650/810 FIRMWARE UPDATING