Toshiba e-STUDIO650 Service Handbook page 285

7. The following will be displayed when the firmware update is completed successfully.
In case of target 1 - 13:
If you continue to update the other areas, press the [START] key and perform the step 5 and the
followings for each area.
Turn OFF the power or press the [CLEAR] key to exit the update screen.
Firmware Version Up Mode
Firmware version up completed.
> Press START key to continue.
In case of target #1 - #5:
The following is displayed when the updating is finished.
Firmware Version Up Mode
Firmware version up completed.
Press START key to next.
8. Press the [CLEAR] key to cancel the updating process.
However, it cannot be canceled once the data elimination process on the flash ROM is started.
Firmware Version Up Mode
Program canceled.
JUNE 2002 © TOSHIBA TEC
Version: 001.003 code:U
target version code
1 001.002 U
2 002.001 0
3 002.031 0
4 003.022 2
5 003.022 3
6 003.033 6
6 - 25
Version of the firmware
installed
Target: 1
Destination code of the
firmware installed
Target: #1
Destination code of the
firmware installed
Version of the firmware updated
Target: 1
e-STUDIO550/650/810 FIRMWARE UPDATING