2. 2. 1. Input check (test mode 03)
The state of each input signal can be checked by pressing the [ENERGY SAVER] key and the
digital keys in the test mode (03).
<Operation procedure>
[0] [3]
[POWER]
Note: Initialization is performed before the copier enters the test mode.
Items to be checked and the state of the copier with the icons [A] to [H] displayed in black are listed on the
following pages.
e-STUDIO550/650/810 ERROR CODES AND SELF-DIAGNOSIS 2 - 10
[START]
([ENERGY
SAVER])
[Example of display during input check]
[Digital key]
(LCD ON)
JUNE 2002 © TOSHIBA TEC
[POWER]
OFF/ON
(Exit)