Image Quality Adjustment; Image Density For Copier; Keys Used In The Operation - Toshiba e-STUDIO650 Service Handbook

3. 4. Image Quality Adjustment

3. 4. 1. Image density for copier

Perform the image density adjustment in the adjustment mode "05" if the user requests to change the
image density.
Original mode
Text/Photo Photo Text
503 501 504 Manual density center value
Code 505 506 507 Manual density light step value
508 509 510 Manual density dark step value
514 512 515 Automatic density
Adjust the image density by taking the following procedure while studying the image obtained from the
test copy and the currently entered values.
<Keys used in the operation>
[0] [5]
[POWER]
1
[Digital keys]: Enter the code.
[START]
[Digital keys]: Enter the adjust-
ment value.
[CLEAR] Corrects the values
[SET]
: Value "ZZZ" is newly stored in
or BC-RAM instead of "YYY".
[INTERRUPT]
[ENERGY SAVER]: Test copy
Return to
the adjustment again
[POWER ]OFF/ON:
adjustment mode
JUNE 2002 © TOSHIBA TEC
Items to adjust
<Display>
100%
TEST MODE
100%
TEST MODE
YYY
Current adjustment value
100%
TEST MODE
100%
WAIT WARMING UP
100%
to make
COPYING
To exit the
Notes: 1. Only one single-sided copy can be made.
2. Since the duplex copying is disabled, make a test copy after
exiting the adjustment mode.
3 - 19
Remarks
The larger the value, the darker the image becomes
The larger the value, the lighter the image of the lighter steps become
The larger the value, the darker the image of the darker steps become
The larger the value, the darker the image becomes
Varies depending on the code "xxx" entered
with the digital keys.
A3
A
Code No.
A3
XXX
ZZZ
A3
A
A3
A
A3
A
e-STUDIO550/650/810 ADJUSTMENT
Newly entered
adjustment value
(YYY is the default
display).