Toshiba e-STUDIO650 Service Handbook page 55

Code Name
663 Auto-feed setting for the
inserter function/tab
paper feeding
664 Auto-feed setting for the
inserter function/tab
paper feeding
672 Initialization of depart-
ment management infor-
mation
690 HDD formatting
691 HDD type display
693 HDD standby mode
800 Image quality control/
Abnormality detection
number (Enter 0 to reset)
802 Setting of image quality
control
803 Image quality control/
Auto-start print volume
setting 1
JUNE 2002 © TOSHIBA TEC
Setting mode (08)
Acceptable
Function Default
Value
PRT 1 0~1
PPC 1 0~1
– – –
ALL – 2, 10, 11
ALL – 0~2
ALL 242 0~255
ALL 0 0~16
ALL 0 0~1
ALL 2 0~30
2 - 41 e-STUDIO550/650/810 ERROR CODES AND SELF-DIAGNOSIS
Contents
Setting of whether or not feeding a paper
automatically when feeding from the
inserter
0: OFF
(Press the [START] key to start feeding.)
1: ON (Automatical feeding)
Setting of whether or not feeding a paper
automatically when feeding from the inserter
0: OFF
(Press the [START] key to start feeding.)
1: ON (Automatical feeding)
Initializing of the department managment
information
* Enter the code with the digital keys and
press the [INITIALIZE] key to perform the
initialization.
If the area storing the department
management information is destroyed for
some reason, "Enter Department code"
is displayed on the control panel even if
the department management function is
not set on. In this case, initialize the area
with this code. This area is normally ini-
tialized at the factory.
2: Normal formatting
10: Formatting except the information of
the scanner template for the controller GA-
1140
11: Formatting only the information of the
scanner template for the controller GA-
1140
( Chapter 3.1.)
0: Not formatted 1: Not used
2: Normal format
Setting the time taken for the HDD to enter
the standby mode.
* This value may need to be changed when
the HDD is replaced since the HDDs of
the different manufactureres have their own
characteristics.
0: ON 1: OFF
Operation
procedure
1
1
–
1
2
1
1
1
2