Display; Firmware Version Up Mode - Toshiba e-STUDIO650 Service Handbook

6. 2. 4. Display

The following screens are displayed in the mode [3][9].
Power ON

Firmware Version Up Mode

> Make a connection from PC.
Firmware Version Up Mode
Established serial connection with PC.
> Press START key to install new
firmwares.
> Please select a target with DIGITAL keys.
Press the
[START] key
1 1'
e-STUDIO550/650/810 FIRMWARE UPDATING
Connection made
Number of area to be updated
successfully
Target: 1
Press the
[CLEAR] key
2
Firmware Version Up Mode
Cannot connect with PC.
Failed to install a new firmware.
Connection
failed
Target: 1
on with PC.
Press the
digital key
Target: #1
on with PC.
Firmware Version Up Mode
Program canceled.
6 - 28
Target: 6
on with PC.
Display changes
corresponding to the
keys to be pressed.
2
Press the
[CLEAR] key
Target: 1
Power OFF
JUNE 2002 © TOSHIBA TEC