Inserter Feeding Delay Jam; Inserter Feeding Stop Jam - Toshiba e-STUDIO650 Service Handbook

[EC0] Inserter feeding delay jam
Are the pickup roller, feed roller and separation roller tainted?
YES
NO
Is the harness between the inserter control board and separation sensor open-circuited?
YES
NO
Is the separation sensor working improperly?
YES
NO
Replace the inserter control board.
[EC1] Inserter feeding stop jam
Are the transport roller and reverse roller tainted?
YES
NO
Is the harness between the inserter control board and separation sensor open-circuited?
YES
NO
Is the separation sensor working improperly?
YES
NO
Replace the inserter control board.
e-STUDIO550/650/810 TROUBLE SHOOTING
Clean up the rollers.
Replace the harness.
Replace the separation sensor.
Clean up the rollers.
Replace the harness.
Replace the separation sensor.
5 - 50 JUNE 2002 © TOSHIBA TEC