Adjustment Of Blurred/Thin Spotted Text; Adjustment Of Image Density For Printer - Toshiba e-STUDIO650 Service Handbook

3. 4. 6. Adjustment of blurred/thin spotted text

The blurred/thin spotted text can be adjusted at the following codes in the adjustment mode (05).
Function / Mode
Copier Printer
Text/Photo Smoothing Toner Save
648 657
Code
The entry procedure of the adjustment value is the same as that for "3.4.1 Image density".

3. 4. 7. Adjustment of Image density for printer

The level of the image density is set at the following codes in the adjustment mode (05).
Mode
Standard Toner save
672-0~4 676-0~4
673-0~4 677-0~4
Code
e-STUDIO550/650/810 ADJUSTMENT
Printer Items to set
658 Adjustment of
blurred/thin spotted
text
Item to set
Adjustment of image
density
Remarks
05-648: When the value is increased, the thin spotted
text is improved, and when it is decreased, the blurred
text is improved.
05-657, 658: When the value is increased, the blurred
text is improved, and when it is decreased, the thin
spotted text is improved.
Note: Remember that the image specifications and life
span of the replacing parts may not meet the
standard when the setting value is changed from
the default value.
The image density level at the printer mode is set.
When the value is decreased, text becomes
lighter.
Notes:
1. Set not to reverse the large and small number
of the setting value corresponding to the sub
code.
Ex.) When substituting the setting value for
672-0 with A
= < A
A
0
2. Input the same value for the code 672/673 and
code 676/677.
3. Remember that the image specifications and
life span of the replacing parts may not meet
the standard when the setting value is
changed from the default value.
3 - 22
Remarks
, · · ·, 672-4 with A :
0 4
= < A = < A = < A
1 2 3 4
June 2002 © TOSHIBA TEC