Toshiba e-STUDIO650 Service Handbook page 289

In case of target 1 - 13 :
1
Press the [START] key
Firmware Version Up Mode
Installing a new firmware.
– reading a file.
Installation
failed
Installed
successfully
3
Firmware Version Up Mode
Firmware version up completed.
Version: 001.003 code: U
> Press START key to continue.
Press the
[START] key
Firmware Version Up Mode
> Press START key to install new firmwares.
> Please select a target with DIGITAL keys.
Press the
[START] key
1 1'
JUNE 2002 © TOSHIBA TEC
Target: 1
Press the
[CLEAR] key
2
Version of the firmware installed
(Not displayed in case of Target 10 - 13)
Target: 1
Destination code of the firmware installed
(Not displayed in case of Target 10 - 13)
Press the
[CLEAR]key
Target: 1
Press the
digital key
Press the
[CLEAR] key
2
6 - 29
Status of updating process (Target 1 - 9)
– reading a file.
– checking a read file.
– checking the device.
– setting NvRAM flags.
– erasing the device.
– writing to the device.
– verifying the device.
– clearing NvRAM flags.
Status of updating process (Target 10 - 12)
– reading a file.
– writing to the device.
2
Target: 1
on with PC.
Display changes
corresponding to
the keys pressed
Target: #1
on with PC.
e-STUDIO550/650/810 FIRMWARE UPDATING
Target: 6
on with PC.