Adjustment Of The Positions Of The Carriages-1 And -2 - Toshiba e-STUDIO650 Service Handbook

(2) Adjustment of the positions of the carriages-1 and -2

a. Move the carriage-2 toward the exit side.
b. Loosen the screws fixing the front side pulley bracket, make the A/B section of the carriage-2 touch
with the inside of the exit side frame and screw it up.
Pulley bracket
Exit side frame
[Rear] [Front]
B
A
c. Put the carriage-1 on the rail, make the C/D section of the exit side frame touch with the inside of
the exit frame and screw up the front/rear side of the bracket to fix it.
Exit side frame
[Front] [Rear]
Bracket
Bracket
D C
e-STUDIO550/650/810 ADJUSTMENT 3 - 26 June 2002 © TOSHIBA TEC