Basic Copy Procedure; Acceptable Originals - Toshiba E-Studio 2006 User Manual

2 COPY FUNCTIONS

Basic Copy Procedure

Learn the basic copy procedure in this section. For the other various functions, see the following pages:
 P.36 "Copy Settings"
Make sure that the equipment is ready to copy.
 P.17 "Preparation 1 - Turning Power ON"
 P.19 "Preparation 2 - Loading Paper"
 P.28 "Preparation 3 - Registering Paper Size and Type"
 Acceptable originals
Acceptable originals differ depending on the setting position. See the table below for more details.
If you are using the Reversing Automatic Document Feeder, you can automatically scan a stack of plain paper originals at
one time.
Setting position
Original glass
Reversing Automatic
Document Feeder
*1 The automatic size detection function is only available when the Reversing Automatic Document Feeder is installed.
*2 The maximum number of sheets acceptable varies depending on the type of original.
 Maximum number of originals scanned at one time
You can scan up to 50 original sheets at one time. When the number of sheets to be scanned exceeds 50 or the built-in
memory in the equipment is full, scanning stops and an error message is displayed on the LCD screen. To copy the data
scanned so far, select "PRINT". To delete them, select "CANCEL JOB".
 Precautions for Reversing Automatic Document Feeder
Do not use the following types of original as they may cause a paper misfeed or damage to the equipment:
 Originals that are folded or curled
 Originals with carbon copies
 Originals that have been taped, pasted, or cut-out
 Originals that have been clipped or stapled
 Originals with holes or tears
 Originals that are damp
 Overhead transparencies or tracing paper
 Coated paper (e.g. coated with wax)
 Originals with multiple holes punched (e.g. loose leaf paper)
The following types of originals can be used but need extra care:
 Originals that you cannot slide with your fingers or whose surface is specially treated (they may not be able to be
separated from each other at feeding)
 Originals that are folded or curled (should be smoothed out before being used)
When black streaks appear
If the scanning area or the guide area is dirty, image problems such as black streaks may occur. Weekly cleaning of these
areas is recommended.
 P.126 "Regular Cleaning"
30

Basic Copy Procedure

Type Maximum size
Plain paper A3 or LD
Special paper
Booklets
Plain paper A3 or LD
2 , 13 - 27 lb.
(50 - 104 g/m
Bond)
Acceptable sizes for
*1
automatic size detection
-
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R
LT format:
LD, LG, LT, LT-R, ST-R, COMP
K format:
8K, 16K, 16K-R
Maximum number of
sheets
-
2, 20 lb.
50 sheets (80 g/m
Bond
)
*2
(or stack height 9.5 mm)