1.2.1 Input check (test mode 03)
The state of each input signal can be checked by pressing the [FAX] key and the digital keys in the
test mode (03).
<Operation procedure>
[0] [3]
[POWER]
Note: Initialization is performed before the copier enters the test mode.
Items to be checked and the state of the copier with the icons [A] to [H] displayed in black are listed on the
following pages.
DP4500/3500 ERROR CODES AND SELF-DIAGNOSIS
[START]
([FAX])
[Example of display during input check]
[Digital key]
1 - 8
December 2000 © TOSHIBA TEC
(LCD ON)
[0] [9]
(Exit)