Finisher or stacker bottom cover removal
See
"Finisher assembly" on page 7-23
1.
Remove the option from the printer.
2.
Remove the standard output bin LED and LED lens. See
and LED lens removal" on page
3.
Press the tabs on the bin media present to remove the sensor from the cover.
4.
Disconnect the cable from the beacon card.
Finisher or stacker controller card assembly removal
See
"Finisher assembly" on page 7-23
1.
Remove the option from the printer.
2.
Remove the front cover. See
3.
Disconnect all cables from the controller card.
for the part number.
A-264.
for the part number.
"Finisher or stacker front cover removal" on page
"Finisher or stacker standard output bin LED
4-248.
Repair information
5062
4-245