Eject Roller - Oki C3530nMFP Maintenance Manual

Oki Data CONFIDENTIAL

4.2.3.15 Eject roller

(1) Remover the guide eject assembly . (See Subsection 4.2.3.14)
.
(2) Detach two claws A to divide the minto the guide eject lower and the guide eject upper
(3) Detach a claw B. Remove three gear idle ejects , the shaft assembly eject (FD) and the
shaft assembly eject (FU) .
(4) Remove the eject sensor , and the lever eject sensor from the guide eject lower .
claws B
Claws A
View A
View A
Figure 4-2-3-15 Eject roller
80 /
43605601TH Rev.1