Auxiliary Output/Speaker Output Interface (Aux) - Pro-face SP5000 Series Hardware Manual

Specifications

Auxiliary Output/Speaker Output Interface (AUX)

ELECTRIC SHOCK AND FIRE
When using the SG terminal to connect an external device to this product:
Verify that a short-circuit loop is not created when you set up the system.

Connect the SG terminal to remote equipment when the external device is not isolated.

Connect the SG terminal to a known reliable ground connection to reduce the risk of damaging

the circuit.
Failure to follow these instructions will result in death or serious injury.
Cable connection
side
AUX Connector: PFXZCDCNAUX1 manufactured by Pro-face
Output Circuit
A Internal Circuit
B Pin Number 6: ALARM+/BUZZER+
C Pin Number 7: ALARM-/BUZZER-
D Load
E External Power
76
Pin No. Signal Name
1 LineOut
2 LineOut_GND
3 SP+
4 SP-
5 NC
6 ALARM+/
BUZZER+
7 ALARM-/
BUZZER-
DANGER
Direction
Output
Output
Output
Output
–
Output
Output
Meaning
Line Out
Line Out Ground
Speaker +
Speaker -
No Connection
(Can be changed via software)