Table of Contents
Advertisement
Environmental Specifications
Box Module / Display Module
Surrounding Air
Temperature
Storage Temperature
Surrounding Air and
Storage Humidity
Dust
Pollution Degree
Corrosive Gases
Atmospheric Pressure
(Operating Altitude)
Vibration Resistance
Shock Resistance
Noise Immunity
Electrostatic Discharge
Immunity
NOTE: When using any of the options for this product, make sure to check the specifications for
any special conditions or cautions that may apply to this product.
Air quality requirements
Do not operate or store the panel where chemicals evaporate, or where chemicals are present in
the air:
Corrosive chemicals: Acids, alkalines, liquids containing salt.
Flammable chemicals: Organic solvents.
INOPERATIVE EQUIPMENT
Do not allow water, liquids, metal, and wiring fragments to enter the panel case.
Failure to follow these instructions can result in injury or equipment damage.
0...60 C (32...140 F)
-20...60 C (-4...140 F)
10%...90% RH (Non condensing, wet bulb temperature 39 C [102.2 F] or
less)
3
-7
3
0.1 mg/m
(10
oz/ft
) or less (non-conductive levels)
For use in Pollution Degree 2 environment
Free of corrosive gases
800...1,114 hPa (2,000 m [6,561 ft] or lower)
IEC/EN 61131-2 compliant
5...9 Hz Single amplitude 3.5 mm (0.14 in)
9...150 Hz Fixed acceleration: 9.8 m/s
X, Y, Z directions for 10 cycles (approx. 100 min.)
IEC/EN 61131-2 compliant
2
147 m/s
, X, Y, Z directions for 3 times
Noise Voltage: 1,000 Vp-p
Pulse Duration: 1 s
Rise Time: 1 ns
(via noise simulator)
Contact Discharge Method: 6 kV (IEC/EN 61000-4-2 Level 3)
CAUTION
SP5000 Series Hardware Manual
2
59
Advertisement
Table of Contents
