External Dimensions; Transfer Cable; Serial Interface - Pro-face GP4000M Series Installation/Replacement Manual

2.5 External Dimensions

For GP-4301TM, the front face display module (display part) and the back face main
module are separated. Compared with GP-37W2, the tickness of the part appearing
on the installation panel differs.
A
(the thickness of the front
bezel)
B
(the depth of the back face)

2.6 Transfer cable

To transfer screen data to GP-4301TM, use a USB transfer cable or Ethernet. Use a
USB data-transfer cable (model: ZC9USCBMB1) or a commercial USB cable (USB
A/mini-B). Please note that the cables (GPW-CB02, GPW-CB03, GP430-CU02-M) for
GP-37W2 cannot be used for GP-4301TM.

2.7 Serial interface

The COM1 port on GP-4301TM is D-sub 9 pin plug. The COM1 port of GP-37W2 is
D-sub 25 pin socket, and the pin assignment and the shape of plug/socket connector
are different from those of GP-4301TM. Because of it, the existing PLC connection
cables cannot be used as they are. If you use the existing connection cables, see
Cable Diagram at the time of
GP-37W2 GP-4301TM
6mm 17.5mm
52mm
replacement].
8/46
39mm
[4.5