Table of Contents
Advertisement
Step
Action
1
Turn OFF this product.
2
Remove the Box Module from the Display Module.
NOTE: Refer to Installation (see page 104)
3
As illustrated, open the System Card Cover in the direction of the arrow.
1
System Card Cover
2
Box Module
4
Push the SD Card once to release, and pull out the card.
NOTE: After using the SD Card, store the SD Card in its case or other safe location.
5
Insert the SD Card into the System Card Slot with the front face of the SD Card facing down,
and push until you hear it "click".
1
System Card Slot
6
Close the System Card Cover.
7
Mount the Box Module on the Display Module.
NOTE: As shown in the image below (example on the left-hand side), you can set the Write-Control
Tab to prevent write operations to the SD Card. Push the tab up, as shown in the example on the
right-hand side, to release the lock and enable writing to the SD Card.
SP5000 Series Hardware Manual
155
Advertisement
Table of Contents
