Pro-face SP5000 Series Hardware Manual page 11

UNINTENDED EQUIPMENT OPERATION
Do not use this product as the only means of control for critical system functions such as motor

start/stop or power control.
Do not use this equipment as the only notification device for critical alarms, such as device

overheating or overcurrent.
Use only the software provided with this product. If you use another software, please confirm

the operation and safety before use.
Failure to follow these instructions can result in death, serious injury, or equipment
damage.
The following characteristics are specific to the LCD panel and are considered normal behavior:
LCD screen may show unevenness in the brightness of certain images or may appear different

when seen from outside the specified viewing angle. Extended shadows, or crosstalk may also
appear on the sides of screen images.
LCD screen pixels may contain black and white colored spots and color display may seem to

have changed.
When the same image is displayed on the screen for a long period, an afterimage may appear

when the image is changed.
The panel brightness may decrease when used for a long time in an environment continuously

filled with inert gas. To prevent deterioration of panel brightness, regularly ventilate the panel.
For more information, please contact your local distributor.
http://www.pro-face.com/trans/en/manual/1015.html
NOTE: Change the screen image periodically and try not to display the same image for a long
period of time.
SERIOUS EYE AND SKIN INJURY
The liquid in the LCD panel contains an irritant:
Avoid direct skin contact with the liquid.

Wear gloves when you handle a broken or leaking unit.

Do not use sharp objects or tools in the vicinity of the LCD panel.

Handle the LCD panel carefully to prevent puncture, bursting, or cracking of the panel material.

If the panel is damaged and any liquid comes in contact with your skin, immediately rinse the

area with running water for at least 15 minutes. If the liquid gets in your eyes, immediately rinse
your eyes with running water for at least 15 minutes and consult a doctor.
Failure to follow these instructions can result in injury or equipment damage.
WARNING
CAUTION
SP5000 Series Hardware Manual
11