Pro-face SP5000 Series Hardware Manual page 108

Installation and Wiring
Panel Cut Dimensions
Based on the panel cut dimensions, open a mount hole on the panel.
Model Name
SP-5500TP
SP-5600TP
SP-5660TP
SP-5700TP
SP-5400WA
SP-5500WA
SP-5600WA
Installing onto Display Module
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Remove all power from the device before removing any covers or elements of the system, and

prior to installing or removing any accessories, hardware, or cables.
Unplug the power cable from both the Display Module and the power supply.

Always use a properly rated voltage sensing device to confirm power is off.

Replace and secure all covers or elements of the system before applying power to the Display

Module.
Failure to follow these instructions will result in death or serious injury.
EQUIPMENT DAMAGE
When mounting this product vertically, first install the Box Module onto the Display Module

before attaching the Display Module to the panel. When installing the Box Module onto the
Display Module, place the Display Module on a clean and level surface with the screen facing
downward.
Only qualified personnel can change the primary battery.

Failure to follow these instructions can result in equipment damage.
108
A
259 mm (+1/-0 mm)
(10.2 in [+0.04/-0 in])
301.5 mm (+1/-0 mm)
(11.87 in [+0.04/-0 in])
383.5 mm (+1/-0 mm)
(15.1 in [+0.04/-0 in])
190 mm (+1/-0 mm)
(7.48 in [+0.04/-0 in])
255 mm (+1/-0 mm)
(10.04 in [+0.04/-0 in])
295 mm (+1/-0 mm)
(11.61 in [+0.04/-0 in])
DANGER
NOTICE
B
201 mm (+1/-0 mm)
(7.91 in [+0.04/-0 in])
227.5 mm (+1/-0 mm)
(8.96 in [+0.04/-0 in])
282.5 mm (+1/-0 mm)
(11.12 in [+0.04/-0 in])
135 mm (+1/-0 mm)
(5.31 in [+0.04/-0 in])
185 mm (+1/-0 mm)
(7.28 in [+0.04/-0 in])
217 mm (+1/-0 mm)
(8.54 in [+0.04/-0 in])
C
1.6...5 mm
(0.06...0.2 in)