About The Book - Pro-face SP5000 Series Hardware Manual

About the Book

At a Glance
Document Scope
This manual describes how to use this product.
Validity Note
This documentation is valid for this product.
The technical characteristics of the device(s) described in this manual also appear online at
http://www.pro-face.com/otasuke/.
The characteristics presented in this manual should be the same as those that appear online. In
line with our policy of constant improvement we may revise content over time to improve clarity and
accuracy. In the event that you see a difference between the manual and online information, use
the online information as your reference.
Registered Trademarks
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States
and/or other countries.
Product names used in this manual may be the registered trademarks owned by the respective
proprietors.
Related Documents
You can download the manuals related to this product, such as the software manual, from our
website "Otasuke Pro" at http://www.pro-face.com/otasuke/.
Product Related Information
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Remove all power from the device before removing any covers or elements of the system, and

prior to installing or removing any accessories, hardware, or cables.
Unplug the power cable from both this product and the power supply.

Always use a properly rated voltage sensing device to confirm power is off.

Replace and secure all covers or elements of the system before applying power to this

product.
Use only the specified voltage when operating this product. The DC unit is designed to use 12

to 24 Vdc. Always check whether your device is DC powered before applying power.
Failure to follow these instructions will result in death or serious injury.
Critical alarm indicators and system functions require independent and redundant protection
hardware and/or mechanical interlocks.
When you cycle power, wait at least 10 seconds after it has been turned off. If this product is
restarted too quickly, it may not operate correctly.
DANGER
SP5000 Series Hardware Manual
9