Pro-face SP5000 Series Hardware Manual page 119

DC Power Cord Preparation
Make sure the ground wire is either the same or heavier gauge than the power wires.

Do not use aluminum wires in the power supply's power cord.

To prevent the possibility of a terminal short, use a pin terminal that has an insulating sleeve.

If the ends of the individual wires are not twisted correctly, the wires may create a short circuit.

The conductor type is solid or stranded wire.

Use copper wire rated for 75 C (167F).

Power Cord Diameter
Conductor type
Conductor length
Recommended Driver
Recommended Pin Terminals
Recommended Pin Terminal Crimp
*2
Tool
*1 For UL compatibility, use AWG14 or AWG13.
*2 Items are manufactured by Phoenix Contact.
0.75...2.5 mm
Solid or stranded wire
SZS 0.6x3.5 (1205053)
*2
3201288 AI 0,75-10 GY
*2
3200182 AI 1 -10 RD
3200195 AI 1,5 -10 BK
3202533 AI 2,5 -10 BU
CRIMPFOX 6
2 *1
(18...13 AWG)
SP5000 Series Hardware Manual
119