Pro-face SP5000 Series Hardware Manual page 146

Installation and Wiring
Step Action
5 Secure the Isolation Unit in place with another Attachment Screw. Use a torque of 0.5 N•m (4.4
lb-in).
A
NOTE:
Attach the Isolation Unit to a stable surface. Do not leave the Isolation Unit or USB/RS-422/485

Conversion Adapter hanging by its cord.
Be careful with wire placement. Overlapping cords may cause noise.

When attaching the Isolation Unit or USB/RS-422/485 Conversion Adapter to the Box Module,

be careful with the attachment position.
See the illustration below for recommended installation.

146
Box Module