Table of Contents
Advertisement
Specifications
Structural Specifications
Box Module
Cooling Method
External Dimensions (W x H x D)
Weight
Premium Display
Grounding
Cooling Method
*1
Structure
External Dimensions
(W x H x D)
Panel Cut
Dimensions (W x H)
Weight
*1 The front face of this product, installed in a solid panel, has been tested using conditions
equivalent to the standards shown in the specification. Even though this product's level of
resistance is equivalent to these standards, oils that should have no effect on this product can
possibly harm this product. This can occur in areas where either vaporized oils are present, or
where low viscosity cutting oils are allowed to adhere to this product for long periods of time. If this
product 's front face protection sheet peels off, these conditions can lead to the ingress of oil into
this product and separate protection measures are suggested.
Also, if non-approved oils are present, they may cause deformation or corrosion of the front panel's
plastic cover. Therefore, prior to installing this product, be sure to confirm the type of conditions
that will be present in this product 's operating environment. If the installation gasket is used for a
long period of time, or if this product and its gasket are removed from the panel, the original level
of protection cannot be kept. To maintain the original protection level, be sure to replace the
installation gasket regularly.
*2 For dimensional tolerance, everything +1/-0 mm (+0.04/-0 in) and R in angle are below R3
(R0.12 in).
*3 Even if the installation wall thickness is within the recommended range for the "Panel Cut
Dimensions", depending on wall's material, size, and installation location of this product and other
devices, the installation wall could warp. To prevent warping, the installation surface may need to
be strengthened.
60
SP-5B10
Natural air circulation
188 x 131 x 35 mm (7.4 x 5.16 x 1.38 in)
0.9 kg (1.98 lb) or less
SP-5500TP
Functional grounding: Grounding resistance of 100 , 2 mm
wire, or your country's applicable standard (same for FG and SG terminals).
Natural air circulation
When using a factory-installed front USB cover: IP65F, IP67F, Type 1.
When using a front USB cover as an option: IP66F, IP67F, Type 1, Type 4X (Indoor
Use Only)/13.
* on the front panel when properly installed in an enclosure and not using the front
panel USB port.
NOTE: The option is a front USB cover with screw manufactured by Pro-face (Model
Number PFXZCDCVUS1).
272.5 x 214.5 x 67 mm
(10.73 x 8.44 x 2.64 in)
259 x 201 mm
*2
(10.2 x 7.91 in)
Panel thickness area:
1.6...5 mm (0.06...0.2 in)
2.7 kg (5.9 lb) or less
SP-5600TP
SP-5660TP
315 x 241 x 67 mm
(12.4 x 9.49 x 2.64 in)
301.5 x 227.5 mm
*2
(11.87 x 8.96 in)
Panel thickness area:
*3
1.6...5 mm (0.06...0.2 in)
3.2 kg (7.1 lb) or less
SP-5B40
SP-5700TP
2
(AWG 14) or thicker
397 x 296 x 67 mm
(15.63 x 11.65 x 2.64 in)
383.5 x 282.5 mm
*2
(15.1 x 11.12 in)
Panel thickness area:
*3
1.6...5 mm (0.06...0.2 in)
4.5 kg (9.9 lb) or less
*3
Advertisement
Table of Contents
