Installation and Wiring
Removing the SD Card
If you remove the SD Card while it is in use, you risk corrupting your data. Before removing the SD
Card from this product, stop all operations on the SD Card.
For instructions on removing the SD Card safely, refer to the corresponding topic in the manual of
your screen editing software.
When using the Open Box, you can either use Windows
launcher to safely remove the SD Card. For information about the launcher, refer to the SP5000
Series Open Box Reference Manual.
Step
Action
1
Make sure the Card Access LED is off.
1
2
Open the Storage Card Cover.
1
3
Push the SD Card once to release, and pull out the card.
NOTE: After using the SD Card, store the SD Card in its case or other safe location.
4
Close the Storage Card Cover.
134
Card Access LED
Storage Card Cover
®
hardware removal tool or use the