Table of Contents
Advertisement
Step
Action
6
Insert a new Battery for Memory Backup and the connector all the way. Either side of the battery
can face top or bottom.
1
Connector
2
Battery
7
Close the Expansion Unit Interface Cover.
NOTE: Make sure the cable is inserted completely inside the enclosure. Otherwise, you can
damage the cable when you close the cover.
8
Reconnect the power supply to this product.
NOTE: After reconnecting the power supply, set up the clock again. Refer to your screen editing
software manual on how to set up the clock.
SP5000 Series Hardware Manual
153
Advertisement
Table of Contents
