Pro-face SP5000 Series Hardware Manual page 42

Parts Identification and Functions
Part Name
A Auxiliary Output/Speaker
Output Interface (AUX)
B Status LED
C Card Access LED
D USB (mini-B) Interface
E Expansion Unit Interface
Cover (EXT)
F Storage Card Cover
G System Card Cover
H USB (Type A) Interface
I Ethernet Interface
(Ethernet1)
J Ethernet Interface
(Ethernet2)
K Serial Interface (COM1)
L Serial Interface (COM2)
M Display Module Interface
42
Description
This interface is Alarm Output or Buzzer Output, and Sound
Output.
(see page 45)
(see page 45)
Conforms to USB2.0 (mini-B) x 1.
Maximum transmission distance: 5 m (16.4 ft)
The Expansion Unit can be embedded in the Expansion Unit
Interface Cover opening, and Battery for Memory Backup can be
connected or replaced.
The SD Card is located in the Storage Card Cover opening.
The system card is located in the System Card Cover opening.
You cannot open this cover when the Box Module is in operation.
Conforms to USB2.0 (Type A) x 2.
Power supply voltage: 5 Vdc+/-5%
Maximum current supplied: 500 mA
Maximum transmission distance: 5 m (16.4 ft)
Ethernet transmission interface (10BASET/100BASE-TX/
1000BASE-T) Connector: Modular jack (RJ-45) x 1
Ethernet transmission interface (10BASET/100BASE-TX/
1000BASE-T) Connector: Modular jack (RJ-45) x 1
RS-232C/422/485 Serial Interface (you can switch the
communication method via software).
Connector: D-Sub 9 pin (plug) x 1
RS-232C/422/485 Serial Interface (you can switch the
communication method via software.)
Connector: D-Sub 9 pin (plug) x 1
Interface that connects the Display Module and Box Module.