Select the VLAN that will propagate the multicast service, specify the
3.
interface attached to a multicast service (through an IGMP-enabled
switch or multicast router), and enter the multicast IP address.
Click Apply.
4.
Figure 327: Assigning an Interface to a Multicast Service
To show the static interfaces assigned to a multicast service:
Click Multicast, IGMP Snooping, IGMP Member.
1.
Select Show Static Member from the Action list.
2.
Select the VLAN for which to display this information.
3.
Figure 328: Showing Static Interfaces Assigned to a Multicast Service
– 565 –
| Multicast Filtering
C
15
HAPTER
Layer 2 IGMP (Snooping and Query)