Edge-Core ECS4510-28P User Manual page 400

| Security Measures
C 13
HAPTER
IP Source Guard
IP Address – IP address corresponding to the client.
◆
Lease Time – The time for which this IP address is leased to the client.
◆
(This value is zero for all static addresses.)
W I
EB NTERFACE
To configure static bindings for IP Source Guard:
Click Security, IP Source Guard, Static Configuration.
1.
Select Add from the Action list.
2.
Enter the required bindings for each port.
3.
Click Apply
4.
Figure 219: Configuring Static Bindings for IP Source Guard
To display static bindings for IP Source Guard:
Click Security, IP Source Guard, Static Configuration.
1.
Select Show from the Action list.
2.
Figure 220: Displaying Static Bindings for IP Source Guard
– 400 –