Edge-Core ECS4510-28P User Manual page 791

SNMPv3 Commands
snmp-server
engine-id
command using the name of the specified community string, and
default settings for the read, write, and notify view.
E
XAMPLE
Console(config)#snmp-server host 10.1.19.23 batman
Console(config)#
R C
ELATED OMMANDS
snmp-server enable traps (788)
This command configures an identification string for the SNMPv3 engine.
Use the no form to restore the default.
S
YNTAX
snmp-server engine-id {local | remote {ip-address}}
engineid-string
no snmp-server engine-id {local | remote {ip-address}}
local - Specifies the SNMP engine on this switch.
remote - Specifies an SNMP engine on a remote device.
ip-address - The Internet address of the remote device.
engineid-string - String identifying the engine ID. (Range: 1-26
hexadecimal characters)
D S
EFAULT ETTING
A unique engine ID is automatically generated by the switch based on its
MAC address.
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
◆ An SNMP engine is an independent SNMP agent that resides either on
this switch or on a remote device. This engine protects against
message replay, delay, and redirection. The engine ID is also used in
combination with user passwords to generate the security keys for
authenticating and encrypting SNMPv3 packets.
A remote engine ID is required when using SNMPv3 informs. (See the
◆
snmp-server host command.) The remote engine ID is used to compute
the security digest for authentication and encryption of packets passed
between the switch and a user on the remote host. SNMP passwords
are localized using the engine ID of the authoritative agent. For
informs, the authoritative SNMP agent is the remote agent. You
therefore need to configure the remote agent's SNMP engine ID before
you can send proxy requests or informs to it.
– 791 –
| SNMP Commands
C 23
HAPTER
SNMPv3 Commands