Table 79: Web Server Commands - Edge-Core ECS4510-28P User Manual

W S
EB ERVER
ip http port
Interface : Eth 1/1
Method List : tps
Group List : radius
Interface : Eth 1/2
Accounting Type : EXEC
Method List : default
Group List : tacacs+
Interface : vty
Accounting Type : Commands 0
Method List : default
Group List : tacacs+
Interface :
. .
.
Accounting Type : Commands 15
Method List : default
Group List : tacacs+
Interface :
Console#
This section describes commands used to configure web browser
management access to the switch.

Table 79: Web Server Commands

Command Function
ip http port Specifies the port to be used by the web browser
interface
ip http server Allows the switch to be monitored or configured from
a browser
ip http secure-port Specifies the UDP port number for HTTPS
ip http secure-server Enables HTTPS (HTTP/SSL) for encrypted
communications
This command specifies the TCP port number used by the web browser
interface. Use the no form to use the default port.
S
YNTAX
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
D S
EFAULT ETTING
80
– 845 –
| Authentication Commands
C 26
HAPTER
Web Server
Mode
GC
GC
GC
GC