Edge-Core ECS4510-28P User Manual page 855

This command sets the SSH server key size. Use the no form to restore the
ip ssh server-key
default setting.
size
S
YNTAX
D
EFAULT
768 bits
C
OMMAND
Global Configuration
C
OMMAND
The server key is a private key that is never shared outside the switch.
The host key is shared with the SSH client, and is fixed at 1024 bits.
E
XAMPLE
This command configures the timeout for the SSH server. Use the no form
ip ssh timeout
to restore the default setting.
S
YNTAX
D
EFAULT
10 seconds
C
OMMAND
Global Configuration
C
OMMAND
The timeout specifies the interval the switch will wait for a response from
the client during the SSH negotiation phase. Once an SSH session has been
established, the timeout for user input is controlled by the
command for vty sessions.
ip ssh server-key size key-size
no ip ssh server-key size
key-size – The size of server key. (Range: 512-896 bits)
S
ETTING
M
ODE
U
SAGE
Console(config)#ip ssh server-key size 512
Console(config)#
ip ssh timeout seconds
no ip ssh timeout
seconds – The timeout for client response during SSH negotiation.
(Range: 1-120)
S
ETTING
M
ODE
U
SAGE
– 855 –
| Authentication Commands
C 26
HAPTER
exec-timeout
Secure Shell