Edge-Core ECS4510-28P User Manual page 525

Figure 299: Showing Maintenance Associations
To configure detailed settings for maintenance associations:
Click Administration, CFM.
1.
Select Configure MA from the Step list.
2.
Select Configure Details from the Action list.
3.
Select an entry from MD Index and MA Index.
4.
Specify the CCM interval, enable the transmission of connectivity check
5.
and cross check messages, and configure the required AIS parameters.
Click Apply
6.
Figure 300: Configuring Detailed Settings for Maintenance Associations
– 525 –
| Basic Administration Protocols
C 14
HAPTER
Connectivity Fault Management