Edge-Core ECS4510-28P User Manual page 834

| Authentication Commands
C 26
HAPTER
TACACS+ Client
tacacs-server port
tacacs-server
retransmit
This command specifies the TACACS+ server network port. Use the no
form to restore the default.
S
YNTAX
tacacs-server port port-number
no tacacs-server port
port-number - TACACS+ server TCP port used for authentication
messages. (Range: 1-65535)
D S
EFAULT ETTING
49
C M
OMMAND ODE
Global Configuration
E
XAMPLE
Console(config)#tacacs-server port 181
Console(config)#
This command sets the number of retries. Use the no form to restore the
default.
S
YNTAX
tacacs-server retransmit number-of-retries
no tacacs-server retransmit
number-of-retries - Number of times the switch will try to
authenticate logon access via the TACACS+ server. (Range: 1 - 30)
D S
EFAULT ETTING
2
C M
OMMAND ODE
Global Configuration
E
XAMPLE
Console(config)#tacacs-server retransmit 5
Console(config)#
– 834 –