Edge-Core ECS4510-28P User Manual page 674

| Unicast Routing
C 19
HAPTER
Configuring the Routing Information Protocol
C E
LEARING NTRIES
R
FROM THE OUTING
T
ABLE
Figure 410: Configuring General Settings for RIP
Use the Routing Protocol > RIP > General (Clear Route) page to clear
entries from the routing table based on route type or a specific network
address.
CLI R
EFERENCES
"clear ip rip route" on page 1425
◆
C U
OMMAND SAGE
Clearing "All" types deletes all routes in the RIP table. To avoid deleting
◆
the entire RIP network, redistribute connected routes using the Routing
Protocol > RIP > Redistribute screen
network a connected route. To delete the RIP routes learned from
neighbors, but keep the RIP network intact, clear "RIP" types from the
routing table.
P
ARAMETERS
These parameters are displayed:
Clear Route By Type – Clears entries from the RIP routing table based
◆
on the following types:
All – Deletes all entries from the routing table.
■
Connected – Deletes all currently connected entries.
■
RIP – Deletes all entries learned through the RIP.
■
Static – Deletes all static entries.
■
– 674 –
(page 679) to make the RIP